You have opted for professional operating controls that are “Made in Germany” now that you have purchased a data input device made by GETT Gerätetechnik GmbH. We would like to support you with recommendations on how to clean the units and suitable cleaning agents so that the design and functions are maintained for as long as possible.
If you are uncertain about using your preferred cleaning agent or disinfectant, you can contact us at any time.
Use a soft cloth and normal cleaning agents suitable for stainless steel surfaces when cleaning our keyboards. Place a small amount of the cleaner on the dampened cloth and remove any dirt with circular movements and only slight pressure. Then wipe the cleaned surface with a damp cloth in order to remove any remaining cleaning agent. When disinfecting, we recommend that you use an alcohol-based disinfectant in line with the manufacturer’s specifications.
Never use any abrasive substances, such as steel wool or aggressive scouring agents, to remove stubborn marks. Do not use any cleaning agents containing substances that are listed as non-resistant in the following table.
Use a soft cloth and a vinegar-based household cleaner to clean our keyboards. Exert slight pressure with the cloth, which has been soaked with the cleaner and then squeezed out, and remove any dirt with circular movements. Then wipe the cleaned surface with a damp cloth in order to remove any remaining cleaning agent. When disinfecting, we recommend that you use an alcohol-based disinfectant in line with the manufacturer’s specifications.
Never use any abrasive substances, such as steel wool or aggressive scouring agents, to remove stubborn marks. Do not use any cleaning agents containing substances that are listed as non-resistant in the following table.
Use a cleaning brush to clean our plastic keyboards in a dry state. You can also wet the keyboards to clean them if they have at least an IP65 degree of protection - e.g. to remove any sticky dirt. Use a cleaning brush and, if necessary, a normal cleaning agent under warm running water (max. +60°C) to clean our plastic keyboards.
Never use any abrasive substances, such as steel wool or aggressive scouring agents, to remove stubborn marks either. Do not use any cleaning agents containing substances that are listed as non-resistant in the following table.
Substance
CAS-Nummer*
Resistance
Organic solvents
Isopropanol
67-63-0
Resistant
Ethanol
64-17-5
Resistant
Loesol 80 (benzine)
64742-49-0
Resistant
Acids
Acetic acid 5%
64-19-7
Resistant
Phosphoric acid 10%
7664-38-2
Resistant
Sulphuric acid 10%
7664-93-9
Resistant
Other substances and mixtures
Liquid Ammonia
7664-41-7
Resistant
Vinegar cleaner
N/A
Resistant
Sodium Carbonate
N/A
Resistant
Hydrogen peroxide 12%
7722-84-1
Resistant
TPH Protect
N/A
Resistant
Bacillol AF
N/A
Resistant
Buraton rapid
N/A
Resistant
Terralin Liquid
N/A
Resistant
Desonova (SprayIn)
N/A
Resistant
Korsolex Basic
N/A
Resistant
Biguacid-S
N/A
Resistant
Microbac Forte
N/A
Resistant
Silicone remover
N/A
Resistant
Sagrotan
N/A
Resistant
Sterillum
N/A
Resistant
Sterillum Virugard
N/A
Resistant
CEBE Spray Power
N/A
Resistant
Mikrozid AF liquid
N/A
Resistant
Incidin-Rapid
N/A
Resistant
Cleansept Wipe max
N/A
Resistant
Steel cleaner (INNOX)
N/A
Resistant
Bacillol 30 Foam
N/A
Resistant
* Chemical Abstracts Service Registry Number, see www.cas.org
"Resistant"
No change after exposure to the chemical
"Resistant with some restrictions"
Slight, insignificant changes after exposure to the chemical without any impairment of functions
"Non-resistant"
A significant change after exposure to the chemical with or without impairment of funtions
LET's get in touch
Have questions or need assistance? Feel free to contact us anytime – we’re happy to help!
